- Restoration products
- >
- Master Steering Wheel Repair Kit
Master Steering Wheel Repair Kit
SKU:
A$85.00
A$85.00
Unavailable
per item
The Eastwood complete Steering Wheel Repair Kit restores your steering wheel to like-new condition, ready to top-coat.
Over time, UV light from the sun will deplete the elastomers in your plastic or hard-rubber steering wheels, resulting in ugly cracks that really date your car.
This Complete Steering Wheel Repair Kit help you bring those steering wheels back to life.
For Steering Wheels requiring major repair, try the Master Steering Wheel Restoration Kit which comes with an adhesion promoter and steering wheel repair book
Contents
1/2 lb of PC-7 Epoxy (52195)
aerosol can of PRE Painting Prep (10041Z or 11949z Low VOC)
aerosol can of Self-Etching Primer (16014Z) and instructions
Content
1-lb. Can of PC-7 Epoxy (52047)
PRE Painting Prep (standard or Low-VOC) (10041Z or 11949z)
Adhesion Promoter (52366Z)
Steering Wheel Restoration Book (52017)
Instructions
Over time, UV light from the sun will deplete the elastomers in your plastic or hard-rubber steering wheels, resulting in ugly cracks that really date your car.
This Complete Steering Wheel Repair Kit help you bring those steering wheels back to life.
For Steering Wheels requiring major repair, try the Master Steering Wheel Restoration Kit which comes with an adhesion promoter and steering wheel repair book
Contents
1/2 lb of PC-7 Epoxy (52195)
aerosol can of PRE Painting Prep (10041Z or 11949z Low VOC)
aerosol can of Self-Etching Primer (16014Z) and instructions
Content
1-lb. Can of PC-7 Epoxy (52047)
PRE Painting Prep (standard or Low-VOC) (10041Z or 11949z)
Adhesion Promoter (52366Z)
Steering Wheel Restoration Book (52017)
Instructions
Application
Review manual to remove steering wheel from vehicle.
Wash the steering wheel with dish washing detergent and water.
Wipe down wheel with PRE Painting Prep repeatedly with clean rags until surface is clean.
Use a triangular file to “V” out any cracks down to the metal frame. Filling narrow cracks without “V”ing out will lead to early failure.
The PC-7 will easily fill the widened repair area.
Mix PC-7 per label instructions and apply, slightly overfilling the repair areas.
Dip your finger in water and smooth the repair immediately after application. This should minimize sanding and yield a smooth surface.
Allow the repairs to fully harden overnight.
Sand repair area(s) with 220 grit wet or dry paper and finish up with 320 grit.
Wipe wheel thoroughly with PRE Painting Prep and allow to dry. DO NOT handle cleaned wheel with bare hands, use disposable gloves.
Following label instructions, apply several light coats of Adhesion Promoter to entire wheel.
Apply finish of choice within 30 minutes.
Safety
Always wear eye, skin and respiratory protection use in a well ventilated area consult MSDS for specific warnings and precautions
Review manual to remove steering wheel from vehicle.
Wash the steering wheel with dish washing detergent and water.
Wipe down wheel with PRE Painting Prep repeatedly with clean rags until surface is clean.
Use a triangular file to “V” out any cracks down to the metal frame. Filling narrow cracks without “V”ing out will lead to early failure.
The PC-7 will easily fill the widened repair area.
Mix PC-7 per label instructions and apply, slightly overfilling the repair areas.
Dip your finger in water and smooth the repair immediately after application. This should minimize sanding and yield a smooth surface.
Allow the repairs to fully harden overnight.
Sand repair area(s) with 220 grit wet or dry paper and finish up with 320 grit.
Wipe wheel thoroughly with PRE Painting Prep and allow to dry. DO NOT handle cleaned wheel with bare hands, use disposable gloves.
Following label instructions, apply several light coats of Adhesion Promoter to entire wheel.
Apply finish of choice within 30 minutes.
Safety
Always wear eye, skin and respiratory protection use in a well ventilated area consult MSDS for specific warnings and precautions
Excludes shipping